-->
This article discusses how to check an NTFS file system's disk space allocation to discover offending files and folders or look for volume corruption in Microsoft Windows Server 2003-based computers.
Original product version: Windows Server 2003
Original KB number: 814594
NTFS uses its log file and checkpoint information to restore the consistency of the file system when the computer is restarted after a system failure. After a bad-sector error, NTFS dynamically remaps the cluster that contains the bad sector, allocates a new cluster for the data, marks the original cluster as bad, and no longer uses the old cluster. For example, after a server crash, NTFS can recover data by replaying its lo. For my motherboard, the flash drive has to be FAT32 if I want to do a UEFI install. I don't know whether it's required, but if you start the Win 10 install, delete the partitions on the OS drive, and let the installer create and format its own partitions, you'll get NTFS by default.
Summary
NTFS supports many volume and file-level features that may lead to what appear to be lost or incorrectly reported free disk space. For example, an NTFS volume may suddenly appear to become full for no reason, and an administrator cannot find the cause or locate the offending folders and files. This may occur if malicious or unauthorized access to an NTFS volume where large files or a high quantity of small files are secretly copied has occurred. These files then have their NTFS permissions removed or restricted. This behavior may also occur after a computer malfunction or power outage occurs that cause volume corruption.
The disk space allocation of an NTFS volume may appear to be misreported for any of the following reasons:
- The NTFS volume's cluster size is too large for the average-sized files that are stored there.
- File attributes or NTFS permissions prevent Windows Explorer or a Windows command prompt from displaying or accessing files or folders.
- The folder path exceeds 255 characters.
- Folders or files contain invalid or reserved file names.
- NTFS metafiles (such as the Master File Table) have grown, and you cannot de-allocate them.
- Files or folders contain alternate data streams.
- NTFS corruption causes free space to be reported as in use.
- Other NTFS features may cause file-allocation confusion.
The following information can help you to optimize, repair, or gain a better understanding of how your NTFS volumes use disk space.
Cluster size is too large
Only files and folders that include internal NTFS metafiles like the Master File Table (MFT), folder indexes, and others can consume disk space. These files and folders consume all the file space allocations by using multiples of a cluster. A cluster is a collection of contiguous sectors. The cluster size is determined by the partition size when the volume is formatted. https://bestpload595.weebly.com/top-free-casino-games.html.
For more information about clusters, see Default cluster size for NTFS, FAT, and exFAT. Ummy video downloader 1 54 download free.
When a file is created, it consumes a minimum of a single cluster of disk space, depending on the initial file size. When data is later added to a file, NTFS increases the file's allocation in multiples of the cluster size.
To determine the current cluster size and volume statistics, run a read-only chkdsk command from a command prompt. To do so, follow these steps:
Click Start, click Run, type cmd, and then click OK.
At the command prompt, type the command:
chkdsk d:.Where d: is the letter of the drive that you want to check.
Click OK.
View the resulting output. For example:
4096543 KB total disk space. <--- Total formatted disk capacity.
2906360 KB in 19901 files. <--- Space used by user file data.
6344 KB in 1301 indexes. <--- Space used by NTFS indexes.
0 KB in bad sectors. <--- Space lost to bad sectors.
49379 KB in use by the system. <--- Includes MFT and other NTFS metafiles.
22544 KB occupied by the log file. <--- NTFS Log file - (Can be adjusted using chkdsk /L:size)
1134460 KB available on disk. <--- Available FREE disk space4096 bytes in each allocation unit. <--- Cluster Size. (4K)
1024135 total allocation units on disk. <--- Total Clusters on disk.
283615 allocation units available on disk. <--- Available free clusters.
Note
Multiply each value that the output reports in kilobytes (KB) by 1024 to determine accurate byte counts. For example: 2906360 x 1024 = 2,976,112,640 bytes. You can use this information to determine how your disk space is being used and the default cluster size.
To determine whether this is the optimal cluster size, you must determine the wasted space on your disk. To do so, follow these steps:
Click Start, click My Computer, and then double-click the drive letter (for example, D) of the volume in question to open the volume and display the folders and files that the root contains.
Click any file or folder, and then click Select All on the Edit menu.
With all the files and folders selected, right-click any file or folder, click Properties, and then click the General tab.
The General tab displays the total number of files and folders on the whole volume and provides two file size statistics: SIZE and SIZE ON DISK.
If you are not using NTFS compression for any files or folders contained on the volume, the difference between SIZE and SIZE ON DISK may represent some wasted space because the cluster size is larger than necessary. You may want to use a smaller cluster size so that the SIZE ON DISK value is as close to the SIZE value as possible. A large difference between the SIZE ON DISK and the SIZE value indicates that the default cluster size is too large for the average file size that you are storing on the volume.
You can only change the cluster size you are using by reformatting the volume. To do this, back up the volume, and then format the volume by using the format command and the /a switch to specify the appropriate allocation. For example: format D: /a:2048(This example uses a 2-KB cluster size).
Note
Alternately, you can enable NTFS compression to regain space that you lost because of an incorrect cluster size. However, this may result in decreased performance.
File attributes or NTFS permissions
Both Windows Explorer and the directory list command dir /a /s display the total file and folder statistics for only those files and folders that you have permissions to access. By default, Files hidden files and protected operating system files are excluded. This behavior may cause Windows Explorer or the dir command to display inaccurate file and folder totals and size statistics.
To include these types of files in the overall statistics, change Folder Options. To do so, follow these steps:
- Click Start, click My Computer, and then double-click the drive letter (for example: D) of the volume. This opens the volume and displays the folders and files that the root contains.
- On the Tools menu, click Folder Options, and then click the View tab.
- Select the Show Hidden Files and Folders check box, and then click to clear the Hide protected operating system files check box.
- Click Yes when you receive the warning message, and then click the Apply button. This change permits Windows Explorer and the
dir /a /scommand to total all the files and folders that the volume contains that the user has permissions to access.
To determine the folders and files that you cannot access, follow these steps:
At the command prompt, create a text file from the output of the
dir /a /scommand.For example: At the command prompt, type the following command:
dir d: /a /s >c:d-dir.txt.Start the Backup or Restore Wizard.
- Click Start, click Run, type ntbackup, and then click OK.
- Click Advanced Mode.
Click Options on the Tools menu, click the Backup Log tab, click Detailed, and then click OK.
In the Backup Utility, click the Backup tab, and then select the check box for the whole volume that is affected (for example: D:), and then click Start Backup.
After the backup is complete, open the backup report and compare folder for folder the NTBackup log output with the d-dir.txt output that you saved in step 1.
Because backup can access all the files, its report may contain folders and files that Windows Explorer and the dir command do not display. You may find it easier to use the NTBackup interface to locate the volume without backing up the volume when you want to search for large files or folders that you cannot access by using Windows Explorer.
After you locate the files that you do not have access to, you can add or change permissions by using the Security tab while you view the properties of the file or folder in Windows Explorer. By default, you cannot access the System Volume Information folder. You must add the correct permissions to include the folder in the dir /a /s command.
You may notice folders or files that do not have a Security tab. Or, you may not be able to re-assign permissions to the affected folders and files. You may receive the following error message when you try to access them:
Microsoft Windows Ntfs Event 98
D:folder_name is not accessible
Access is denied
If you have any such folders, contact Microsoft Product Support Services for additional help.
Invalid file names
Vuescan pro 9 6 20 download free. Folders or files that contain invalid or reserved file names may also be excluded from file and folder statistics. Folders or files that contain leading or trailing spaces are valid in NTFS, but they are not valid from a Win32 subsystem point of view. Therefore, neither Windows Explorer nor a command prompt can reliably work with them.
You may not be able to rename or delete these files or folders. When you try to do so, you may receive one of the following error messages:
Error renaming file or folder
Cannot rename file: Cannot read from the source file or disk.
Or
Error deleting file or folder
Cannot delete file: Cannot read from the source file or disk.
If you have folders or files that you cannot delete or rename, contact Microsoft Product Support Services.
NTFS Master File Table (MFT) expansion
When an NTFS volume is created and formatted, NTFS metafiles are created. One of these metafiles is named the Master File Table (MFT). It is small when it is created (approximately 16 KB), but it grows as files and folders are created on the volume. When a file is created, it is entered in the MFT as a File Record Segment (FRS). The FRS is always 1024 bytes (1 KB). As files are added to the volume, the MFT grows. However, when files are deleted, the associated FRSs are marked as free for reuse, but the total FRSs and associated MFT allocation remains. That is why you do not regain the space used by the MFT after you delete a large number of files, .
Microsoft Ntfs Usb
To see exactly how large the MFT is, you can use the built-in defragmenter to analyze the volume. The resulting report provides detailed information about the size and number of fragments in the MFT.
External hard drive reliability ratings 2015. For example:
Master File Table (MFT) fragmentation
Total MFT size = 26,203 KB
MFT record count = 21,444
Percent MFT in use = 81 %
Total MFT fragments = 4
However, for more complete information about how much space (overhead) the whole NTFS is using, run the chkdsk.exe command, and then view the output for the following line:
In use by system.
Currently, only third-party defragmenters consolidate unused MFT FRS records and reclaim unused MFT allocated space.
Alternate data streams
NTFS permits files and folders to contain alternate data streams. With this feature, you can associate multiple data allocations with a single file or folder. The use of alternate data streams on files and folders has the following limitations:
- Windows Explorer and the dir command do not report the data in alternate data streams as part of the file size or volume statistics. Instead, they show only the total bytes for the primary data stream.
- The output from chkdsk accurately reports the space that a user's data files use, including alternate data streams.
- Disk quotas accurately track and report all data stream allocations that are part of a user's data files.
- NTBackup records the number of bytes backed up in the backup log report. However it does not show which files contain alternate data streams. It also does not show accurate file sizes for files that include data in alternate streams.
NTFS file system corruption
In rare circumstances, the NTFS Metafiles $MFT or $BITMAP may become corrupted and result in lost disk space. You can identify and fix this issue by running the chkdsk /f command against the volume. Toward the end of chkdsk, you receive the following message if you must adjust the $BITMAP:Correcting errors in the master file table's (MFT) BITMAP attribute. CHKDSK discovered free space marked as allocated in the volume bitmap. Windows has made corrections to the file system.
Other NTFS features that may cause file allocation confusion
NTFS also supports hard links and reparse points that permit you to create volume mount points and directory junctions. These additional NTFS features may cause confusion when you try to determine how much space a physical volume is consuming.
A hard link is a directory entry for a file regardless of where the file data is located on that volume. Every file has at least one hard link. On NTFS volumes, each file can have multiple hard links, and therefore a single file can appear in many folders (or even in the same folder with different names). Because all the links refer to the same file, programs can open any of the links and modify the file. A file is deleted from the file system only after all the links to it are deleted. After you create a hard link, programs can use it like any other file name.
https://rasnexoftcon1985.mystrikingly.com/blog/zotero-reference-manager. Note
Windows Explorer and a command prompt show all linked files as being the same size, even though they all share the same data and do not actually use that amount of disk space.
NTFS uses its log file and checkpoint information to restore the consistency of the file system when the computer is restarted after a system failure. After a bad-sector error, NTFS dynamically remaps the cluster that contains the bad sector, allocates a new cluster for the data, marks the original cluster as bad, and no longer uses the old cluster. For example, after a server crash, NTFS can recover data by replaying its lo. For my motherboard, the flash drive has to be FAT32 if I want to do a UEFI install. I don't know whether it's required, but if you start the Win 10 install, delete the partitions on the OS drive, and let the installer create and format its own partitions, you'll get NTFS by default.
Summary
NTFS supports many volume and file-level features that may lead to what appear to be lost or incorrectly reported free disk space. For example, an NTFS volume may suddenly appear to become full for no reason, and an administrator cannot find the cause or locate the offending folders and files. This may occur if malicious or unauthorized access to an NTFS volume where large files or a high quantity of small files are secretly copied has occurred. These files then have their NTFS permissions removed or restricted. This behavior may also occur after a computer malfunction or power outage occurs that cause volume corruption.
The disk space allocation of an NTFS volume may appear to be misreported for any of the following reasons:
- The NTFS volume's cluster size is too large for the average-sized files that are stored there.
- File attributes or NTFS permissions prevent Windows Explorer or a Windows command prompt from displaying or accessing files or folders.
- The folder path exceeds 255 characters.
- Folders or files contain invalid or reserved file names.
- NTFS metafiles (such as the Master File Table) have grown, and you cannot de-allocate them.
- Files or folders contain alternate data streams.
- NTFS corruption causes free space to be reported as in use.
- Other NTFS features may cause file-allocation confusion.
The following information can help you to optimize, repair, or gain a better understanding of how your NTFS volumes use disk space.
Cluster size is too large
Only files and folders that include internal NTFS metafiles like the Master File Table (MFT), folder indexes, and others can consume disk space. These files and folders consume all the file space allocations by using multiples of a cluster. A cluster is a collection of contiguous sectors. The cluster size is determined by the partition size when the volume is formatted. https://bestpload595.weebly.com/top-free-casino-games.html.
For more information about clusters, see Default cluster size for NTFS, FAT, and exFAT. Ummy video downloader 1 54 download free.
When a file is created, it consumes a minimum of a single cluster of disk space, depending on the initial file size. When data is later added to a file, NTFS increases the file's allocation in multiples of the cluster size.
To determine the current cluster size and volume statistics, run a read-only chkdsk command from a command prompt. To do so, follow these steps:
Click Start, click Run, type cmd, and then click OK.
At the command prompt, type the command:
chkdsk d:.Where d: is the letter of the drive that you want to check.
Click OK.
View the resulting output. For example:
4096543 KB total disk space. <--- Total formatted disk capacity.
2906360 KB in 19901 files. <--- Space used by user file data.
6344 KB in 1301 indexes. <--- Space used by NTFS indexes.
0 KB in bad sectors. <--- Space lost to bad sectors.
49379 KB in use by the system. <--- Includes MFT and other NTFS metafiles.
22544 KB occupied by the log file. <--- NTFS Log file - (Can be adjusted using chkdsk /L:size)
1134460 KB available on disk. <--- Available FREE disk space4096 bytes in each allocation unit. <--- Cluster Size. (4K)
1024135 total allocation units on disk. <--- Total Clusters on disk.
283615 allocation units available on disk. <--- Available free clusters.
Note
Multiply each value that the output reports in kilobytes (KB) by 1024 to determine accurate byte counts. For example: 2906360 x 1024 = 2,976,112,640 bytes. You can use this information to determine how your disk space is being used and the default cluster size.
To determine whether this is the optimal cluster size, you must determine the wasted space on your disk. To do so, follow these steps:
Click Start, click My Computer, and then double-click the drive letter (for example, D) of the volume in question to open the volume and display the folders and files that the root contains.
Click any file or folder, and then click Select All on the Edit menu.
With all the files and folders selected, right-click any file or folder, click Properties, and then click the General tab.
The General tab displays the total number of files and folders on the whole volume and provides two file size statistics: SIZE and SIZE ON DISK.
If you are not using NTFS compression for any files or folders contained on the volume, the difference between SIZE and SIZE ON DISK may represent some wasted space because the cluster size is larger than necessary. You may want to use a smaller cluster size so that the SIZE ON DISK value is as close to the SIZE value as possible. A large difference between the SIZE ON DISK and the SIZE value indicates that the default cluster size is too large for the average file size that you are storing on the volume.
You can only change the cluster size you are using by reformatting the volume. To do this, back up the volume, and then format the volume by using the format command and the /a switch to specify the appropriate allocation. For example: format D: /a:2048(This example uses a 2-KB cluster size).
Note
Alternately, you can enable NTFS compression to regain space that you lost because of an incorrect cluster size. However, this may result in decreased performance.
File attributes or NTFS permissions
Both Windows Explorer and the directory list command dir /a /s display the total file and folder statistics for only those files and folders that you have permissions to access. By default, Files hidden files and protected operating system files are excluded. This behavior may cause Windows Explorer or the dir command to display inaccurate file and folder totals and size statistics.
To include these types of files in the overall statistics, change Folder Options. To do so, follow these steps:
- Click Start, click My Computer, and then double-click the drive letter (for example: D) of the volume. This opens the volume and displays the folders and files that the root contains.
- On the Tools menu, click Folder Options, and then click the View tab.
- Select the Show Hidden Files and Folders check box, and then click to clear the Hide protected operating system files check box.
- Click Yes when you receive the warning message, and then click the Apply button. This change permits Windows Explorer and the
dir /a /scommand to total all the files and folders that the volume contains that the user has permissions to access.
To determine the folders and files that you cannot access, follow these steps:
At the command prompt, create a text file from the output of the
dir /a /scommand.For example: At the command prompt, type the following command:
dir d: /a /s >c:d-dir.txt.Start the Backup or Restore Wizard.
- Click Start, click Run, type ntbackup, and then click OK.
- Click Advanced Mode.
Click Options on the Tools menu, click the Backup Log tab, click Detailed, and then click OK.
In the Backup Utility, click the Backup tab, and then select the check box for the whole volume that is affected (for example: D:), and then click Start Backup.
After the backup is complete, open the backup report and compare folder for folder the NTBackup log output with the d-dir.txt output that you saved in step 1.
Because backup can access all the files, its report may contain folders and files that Windows Explorer and the dir command do not display. You may find it easier to use the NTBackup interface to locate the volume without backing up the volume when you want to search for large files or folders that you cannot access by using Windows Explorer.
After you locate the files that you do not have access to, you can add or change permissions by using the Security tab while you view the properties of the file or folder in Windows Explorer. By default, you cannot access the System Volume Information folder. You must add the correct permissions to include the folder in the dir /a /s command.
You may notice folders or files that do not have a Security tab. Or, you may not be able to re-assign permissions to the affected folders and files. You may receive the following error message when you try to access them:
Microsoft Windows Ntfs Event 98
D:folder_name is not accessible
Access is denied
If you have any such folders, contact Microsoft Product Support Services for additional help.
Invalid file names
Vuescan pro 9 6 20 download free. Folders or files that contain invalid or reserved file names may also be excluded from file and folder statistics. Folders or files that contain leading or trailing spaces are valid in NTFS, but they are not valid from a Win32 subsystem point of view. Therefore, neither Windows Explorer nor a command prompt can reliably work with them.
You may not be able to rename or delete these files or folders. When you try to do so, you may receive one of the following error messages:
Error renaming file or folder
Cannot rename file: Cannot read from the source file or disk.
Or
Error deleting file or folder
Cannot delete file: Cannot read from the source file or disk.
If you have folders or files that you cannot delete or rename, contact Microsoft Product Support Services.
NTFS Master File Table (MFT) expansion
When an NTFS volume is created and formatted, NTFS metafiles are created. One of these metafiles is named the Master File Table (MFT). It is small when it is created (approximately 16 KB), but it grows as files and folders are created on the volume. When a file is created, it is entered in the MFT as a File Record Segment (FRS). The FRS is always 1024 bytes (1 KB). As files are added to the volume, the MFT grows. However, when files are deleted, the associated FRSs are marked as free for reuse, but the total FRSs and associated MFT allocation remains. That is why you do not regain the space used by the MFT after you delete a large number of files, .
Microsoft Ntfs Usb
To see exactly how large the MFT is, you can use the built-in defragmenter to analyze the volume. The resulting report provides detailed information about the size and number of fragments in the MFT.
External hard drive reliability ratings 2015. For example:
Master File Table (MFT) fragmentation
Total MFT size = 26,203 KB
MFT record count = 21,444
Percent MFT in use = 81 %
Total MFT fragments = 4
However, for more complete information about how much space (overhead) the whole NTFS is using, run the chkdsk.exe command, and then view the output for the following line:
In use by system.
Currently, only third-party defragmenters consolidate unused MFT FRS records and reclaim unused MFT allocated space.
Alternate data streams
NTFS permits files and folders to contain alternate data streams. With this feature, you can associate multiple data allocations with a single file or folder. The use of alternate data streams on files and folders has the following limitations:
- Windows Explorer and the dir command do not report the data in alternate data streams as part of the file size or volume statistics. Instead, they show only the total bytes for the primary data stream.
- The output from chkdsk accurately reports the space that a user's data files use, including alternate data streams.
- Disk quotas accurately track and report all data stream allocations that are part of a user's data files.
- NTBackup records the number of bytes backed up in the backup log report. However it does not show which files contain alternate data streams. It also does not show accurate file sizes for files that include data in alternate streams.
NTFS file system corruption
In rare circumstances, the NTFS Metafiles $MFT or $BITMAP may become corrupted and result in lost disk space. You can identify and fix this issue by running the chkdsk /f command against the volume. Toward the end of chkdsk, you receive the following message if you must adjust the $BITMAP:Correcting errors in the master file table's (MFT) BITMAP attribute. CHKDSK discovered free space marked as allocated in the volume bitmap. Windows has made corrections to the file system.
Other NTFS features that may cause file allocation confusion
NTFS also supports hard links and reparse points that permit you to create volume mount points and directory junctions. These additional NTFS features may cause confusion when you try to determine how much space a physical volume is consuming.
A hard link is a directory entry for a file regardless of where the file data is located on that volume. Every file has at least one hard link. On NTFS volumes, each file can have multiple hard links, and therefore a single file can appear in many folders (or even in the same folder with different names). Because all the links refer to the same file, programs can open any of the links and modify the file. A file is deleted from the file system only after all the links to it are deleted. After you create a hard link, programs can use it like any other file name.
https://rasnexoftcon1985.mystrikingly.com/blog/zotero-reference-manager. Note
Windows Explorer and a command prompt show all linked files as being the same size, even though they all share the same data and do not actually use that amount of disk space.
Volume mount points and directory junctions permit an empty folder on an NTFS volume to point to the root or subfolder on another volume. Windows Explorer and a dir /s command follow the reparse point, count any files and folders on the destination volume, and then include them in the host volume's statistics. This may mislead you to believe that more space is being used on the host volume than what is actually being used.
In summary, you can use chkdsk output, NTBackup GUI or backup logs, and the viewing of disk quotas to determine how disk space is being used on a volume. However, Windows Explorer and the dir command have some limitations and drawbacks when used for this purpose.
Nov 04, 2019
NT file system (NTFS), which is also sometimes called the New Technology File System, is a process that the Windows NT operating system uses for storing, organizing, and finding files on a hard disk efficiently. Why won t my external hard drive show up.
NTFS was first introduced in 1993, as apart of the Windows NT 3.1 release.
The benefits of NTFS are that, compared to other similar file systems like File Allocation Table (FAT) and High-Performance File System (HPFS), NTFS focuses on:
- Performance: NTFS allows file compression so your organization can enjoy increased storage space on a disk.
- Security access control: NTFS will enable you to place permissions on files and folders so you can restrict access to mission-critical data.
- Reliability: NTFS focuses on the consistency of the file system so that in the event of a disaster (such as a power loss or system failure), you can quickly restore your data.
- Disk space utilization: In addition to file compression, NTFS also allows disk quotas. This feature enables businesses to have even more control over storage space.
- File system journaling: This means that you can easily keep a log of—and audit—the files added, modified, or deleted on a drive. This log is called the Master File Table (MFT).
How Does NTFS Work
The technical breakdown of NTFS is as follow
- A hard disk is formatted
- A file gets divided into partitions within the hard disk
- Within each partition, the operating system tracks every file stored in a specific operating system
- Each file is distributed and stored in one or more clusters or disk spaces of a predefined uniform size (on the hard disk)
- The size of each cluster will range from 512 bytes to 64 kilobytes
You can control the size of a cluster size based on what's most important to your organization:
- Efficient use of disk space
- The number of disk accesses required to access a file
Drawbacks of NTFS
The primary disadvantage of NTFS is that its modern capabilities aren't accessible to older technology. And, because NTFS is designed to work with a Windows operating system, devices that operated from Mac or Android aren't always compatible. For example:
- Mac OS computers can read NTFS formatted drives, but they can only get written to NTFS with the help of third-party software
- Media devices like DVD players, TVs, and digital cameras are likely too old to leverage NTFS storage devices
Additionally, NTFS does not include a system for guaranteeing performance and bandwidth to the file system, which can pose a problem to some users.
Who Uses NTFS?
Today, NTFS is used most often with the following Microsoft operating systems:
- Windows 10
- Windows 8
- Windows 7
- Windows Vista
- Windows XP
- Windows 2000
- Windows NT
However, it is possible to leverage NTFS with other operating systems like Linux and BSD.
